Use the WebAdmin Interface to configure the XIMSS module. Open the Access page in the Settings realm:

Processing
Log Level:	Crashes OnlyFailuresMajor & FailuresProblemsLow LevelAll Info	Channels:	off135102550100250500100030001000030000other	Listener

Use the Log setting to specify the type of information the XIMSS module should put in the Server Log. Usually you should use the Major (message transfer reports) or Problems (message transfer and non-fatal errors) levels. But when you experience problems with the XIMSS module, you may want to set the Log Level setting to Low-Level or All Info: in this case protocol-level or link-level details will be recorded in the System Log as well. When the problem is solved, set the Log Level setting to its regular value, otherwise your System Log files will grow in size very quickly.

The XIMSS module records in the System Log are marked with the XIMSSI tag.

When you specify a non-zero value for the Maximum Number of Channels setting, the XIMSS module creates a Listener. The module starts to accept all XIMSS connections that clients establish in order to communicate with your Server. The setting is used to limit the number of simultaneous connections the XIMSS module can accept. If there are too many incoming connections open, the module will reject new connections, and the client should retry later.

By default, the XIMSS module Listener accepts clear text connections on the TCP port 11024. Follow the Listener link to tune the XIMSS Listener.

XIMSS connections can be made to TCP ports served with other CommuniGate Pro modules. If the first symbol received on a connection made to the HTTP module is the < symbol, the HTTP module passes the connection to the XIMSS module.

When a connection is passed:

• the logical job of the passing module completes.
• the logical job of the XIMSS module is created, in the same way when an XIMSS connection is received on a port served with the XIMSS module.
• the XIMSS module restrictions for the total number of XIMSS channels and for the number of channels opened from the same IP address are applied.

When all users initiate XIMSS connections via other Module ports, you can disable the XIMSS Listener by setting all its ports to zero.

When a Flash client connects to an XMLSocket server (such as the CommuniGate Pro XIMSS module), it can send a special policy-file-request request. The XIMSS module replies with an XML document allowing the client to access any port on the Server.

When a user is authenticated, the XIMSS module creates a XIMSS session. The current XIMSS module TCP connection can be used to communicate with that session.

A XIMSS session can be created without the XIMSS module, using special requests sent to the HTTP User module. See the XIMSS Protocol section for more details.

The XIMSS session records in the System Log are marked with the XIMSS tag.

Manual De Animacao Richard Williams Pdf Download Gratis -

**IGO Error 108: What It Means and How to Fix It** Are you experiencing issues with your navigation system? Have you encountered the frustrating "IGO Error 108" message on your screen? If so, you're not alone. Many users have reported this error, which can be caused by a variety of factors. In this article, we'll explore what IGO Error 108 is, its common causes, and most importantly, provide a step-by-step guide on how to fix it. **What is IGO Error 108?** IGO is a popular navigation software used in various devices, including GPS systems, smartphones, and tablets. Error 108 is a specific error code that appears when the software encounters a problem. The error message usually reads: "IGO Error 108: Unable to start navigation." This error can occur at any time, whether you're trying to launch the app, update the software, or use it for navigation. **Common Causes of IGO Error 108** After researching and analyzing user reports, we've identified some common causes of IGO Error 108: * **Corrupted software files**: Damaged or corrupted files within the IGO software can cause the error. * **Insufficient storage space**: If your device has low storage capacity, it may prevent IGO from functioning properly. * **Outdated software**: Using an outdated version of IGO can lead to compatibility issues and errors. * **Incorrect installation**: Improper installation of the software or updates can cause errors. * **Device compatibility issues**: Incompatibility between the IGO software and your device's operating system or hardware can lead to errors. * **License issues**: Problems with your IGO license or activation can also trigger Error 108. **Symptoms of IGO Error 108** If you're experiencing IGO Error 108, you may notice the following symptoms: * The IGO app fails to launch or crashes immediately. * You receive the error message "IGO Error 108: Unable to start navigation." * Navigation functions, such as GPS tracking or map loading, are unavailable. **How to Fix IGO Error 108** Don't worry; we've got you covered. Here are some troubleshooting steps to help you fix IGO Error 108: ### Step 1: Restart Your Device Sometimes, a simple reboot can resolve the issue. Turn off your device, wait for a few seconds, and then restart it. Try launching IGO again to see if the error persists. ### Step 2: Check Storage Space Ensure you have sufficient storage space on your device. Delete unnecessary files, uninstall unused apps, or expand your storage capacity if needed. ### Step 3: Update IGO Software Make sure you're running the latest version of IGO. Check the official website or your device's app store for updates. ### Step 4: Reinstall IGO If updating doesn't work, try reinstalling IGO. Uninstall the app, and then download and install the latest version. ### Step 5: Check License and Activation Verify that your IGO license is valid and activated correctly. If you're unsure, contact IGO support or check your license details on the official website. ### Step 6: Clear Cache and Data Clearing the cache and data can resolve issues related to corrupted files. Go to your device's settings, find the IGO app, and clear its cache and data. ### Step 7: Check Device Compatibility Ensure your device meets the minimum system requirements for IGO. If you're using an older device, it may not be compatible with the latest IGO software. ### Step 8: Contact IGO Support If none of the above steps resolve the issue, reach out to IGO's customer support for further assistance. They may be able to provide additional troubleshooting steps or repair or replace your license. **Conclusion** IGO Error 108 can be frustrating, but it's usually fixable with some basic troubleshooting steps. By understanding the causes and symptoms of the error, you can try the solutions outlined above. If you're still experiencing issues, don't hesitate to contact IGO support for help. With a little patience and persistence, you should be able to resolve IGO Error 108 and get back to navigating with ease. **Additional Tips** * Regularly update your IGO software to ensure you have the latest features and bug fixes. * Use a high-quality SD card or internal storage to prevent storage-related issues. * Avoid modifying system files or settings unless you're sure of what you're doing. By following these tips and troubleshooting steps, you should be able to overcome IGO Error 108 and enjoy seamless navigation. No input data

You can monitor the XIMSS Module activity using the WebAdmin Interface.

Click the Access link in the Monitors realm to open the Access Monitoring page:

3 of 3 selected

ID	IP Address	Account	Connected	Status	Running
9786	[216.200.213.116]	user1@domain2.dom	3min	listing messages	2sec
9794	[216.200.213.115]	user2@domain1.dom	34sec	reading request
9803	[216.200.213.115]		2sec	authenticating

ID

This field contains the XIMSS numeric session ID. In the CommuniGate Pro Log, this session records are marked with the XIMSS-nnnnn flag, where nnnnn is the session ID.

IP Address

This field contains the IP address the client has connected from.

Account

This field contains the name of the client Account (after successful authentication).

Connected

This field contains the connection time (time since the client opened this TCP/IP session).

Status

This field contains either the name of the operation in progress or, if there is not pending operation, the current session status (Authenticating, Selected, etc.).

Running

If there is an XIMSS operation in progress, this field contains the time since operation started.

XIMSS activity can be monitored with the CommuniGate Pro Statistic Elements.